ftkhon@foxmail.com    +66-0-840201519
Cont

Have any Questions?

+66-0-840201519

Nov 18, 2022

Zhang Liyong Of Futong Group: Development And Application Of G.654E Optical Fiber And Cable

At ODC (2016) China Optical Communication Development and Competitiveness Forum, Futong Group made a wonderful speech under the theme of "Building a future oriented optical network". The following is the content of the speech:


Some time ago, I saw a VCR of Huawei -- a future scene about 5G era and interconnection of everything. It was very beautiful and fascinating. That kind of life puts forward new requirements for the network. With higher bandwidth and faster speed, it is inevitable that the network will be expanded from 100G to 400G. Such a network puts forward two requirements for the whole system - one is to increase the optical signal to noise ratio (OSNR), and the other is to reduce the nonlinear effect. In this way, it also puts forward two requirements for optical fiber, namely, ultra-low loss and larger effective area, so that the light energy can spread farther and the power is higher. The above requirements are actually the key to the G.654E fiber we often mention.


The profile structure of G.654E optical fiber is different from that of ordinary optical fiber. G.654 requires a pure silicon core and can only be doped with elements in the cladding. VAD is one of the best processes for manufacturing pure silica core preforms in the world. The VAD technology is used to make the pure silica core rod loose body. The deposition process further increases the stability of the gas flow field in the reactor by accurately controlling the gas flow and heating the temperature of the blowtorch, thus reducing the density fluctuation caused by SiO2 deposition. The most critical factor in G.654E fabrication is the deposition density, which plays a crucial role in the subsequent doping process. There are two doping methods, one is doping during deposition, the other is doping during sintering. It is very difficult to control the doping concentration in the deposition process, and the problem of fluorine diffusion in the sintering process must be faced; The doping in sintering process is easy to introduce water molecules, which leads to the increase of the content of fluorine gas material (CF4). The two doping methods have their own advantages and disadvantages. The former is complex in operation, while the latter is expensive. Through the research on the wire drawing process of pure silicon core preform, we found that the mismatch of the viscosity of the core package interface easily led to the residual stress during the wire drawing process, which was related to the process parameters such as wire drawing tension and preform profile structure. If the profile is designed with gradient, the additional loss of the drawn fiber can be effectively reduced.


The G654E optical fiber developed by Futong Group was tested by China Thale Laboratory (report No. B16X73075) and met the requirements of GB/T 9771.2-2008 Single mode Optical Fiber for Communication Part 2: Characteristics of Cut off Wavelength Shift Single mode Optical Fiber and the enterprise standard Q/FSO-J2-01-2016-2016 Large Effective Area Ultra Low Loss Single mode Optical Fiber.


The VAD process of Futong Group has developed a pure silicon core loose body deposition technology, which mainly uses the self-designed laser control system and constant temperature and pressure feeding system to control the core bar deposition, greatly improving the stability of the core bar deposition, and at the same time controlling the density of the loose body within the required range; At the same time, Futong has researched and developed a kind of vitrification and fluorine doping process, which mainly adopts the innovative loose body vitrification and fluorine doping process. The core layer component is pure silicon dioxide. Through theoretical research and process development, it realizes the uniform fluorine doping of the preform cladding and greatly improves the fluorine doping concentration of the preform cladding; The third innovation lies in the research and development of a graphite furnace vitrification technology, which uses a graphite resistance furnace for vitrification heating, which can not only greatly save costs, but also greatly increase the uniform distribution of heat energy in the vitrification process. Futong has also applied for invention patents. Among them, "A Method of Fluorine Doping for Optical Fiber Preform Cladding" and "A Graphite for Sintering Loose Glass" have been granted invention patents. According to the conclusion of the novelty search report of Zhejiang Institute of Science and Technology Information, after comparative analysis, Futong uses the loose body of pure silica core rod made by its own patent, uses the double blowtorch technology, and the two raw materials blowtorch form a certain angle. In the above literature, except for the central part of the relevant patent applied by Futong Group, no other literature specifically describes it.


In the development of G.654E optical cable, Futong Group designed the cable GYTA and GYTZA according to the specific requirements of TD/T 901-2009 "Stranded outdoor loose tube cable for communication" and YD/T 1114-2015 "Halogen-free flame retardant optical cable". The GYTA and GYTZA samples have been tested in full specifications, and all the specifications fully meet the requirements of relevant standards and use. After cabling, the transmission loss of optical fiber at 1550nm window is less than 0.170dB/km, with an average of 0.165dB/km. Futong’s G.654E cable will be applied to Hami-Balikun truck line in Xinjiang and Qingdao-Jinan truck line in Shandong laid by China Unicom, and the Liaoning provincial truck line laid by China Mobile.

 

  The launch of the large effective area and ultra-low loss single mode optical fiber conforms to the national industrial policies, firmly grasps the needs of the optical fiber industry and the trend of technology development, pays attention to the development and mastery of the core technologies, meets the needs of the healthy development of China’s optical fiber industry, and is not subject to the international large enterprises. It will further drive the common development of the cable and optical fiber transmission system. The launch of this product has great social value for breaking the foreign technological monopoly.


Based on the principles of openness, cooperation and sharing, Futong Group will work together with the upstream and downstream to achieve the  complementary advantages, mutual assistance and win-win cooperation, jointly promote the standard of industrialization and specification for the international and domestic optical fiber and cable industries, carry out all-round system cooperation with partners by the capital, technology, intelligent manufacturing, intelligent products, intelligent services and other aspects. In addition, Futong Group is committed to achieving a global layout of the optical communication products in the technology research and development, raw material supply, manufacturing and application markets. Futong Group firmly grasps the strategic opportunity period of the optical communication industry brought by "Internet+" and "Industry 4.0", strives to be a competitive enterprise group in the field of global optical fiber and cable by 2020, and fully implements the "Second main business" of the "Five-sphere Integrated Plan", built a comprehensive cable enterprise group with global competitiveness in 2025, becoming a world-renowned enterprise group, and makes unremitting efforts to be a respected and sustainable enterprise.


Send Inquiry